Menu

Valves

SEAL VALVE

Shut-off valve with bubble seal, shut-off valve and other shut-off valves

Housing:	GG25, GGG40, GSC-25, stainless steel
Pressure (bar):	PN 16 - PN 400
Design:	flanged, welded
Dimensions:	DN 15 - DN 800
Drive:	manual, electric, pneumatic

Zaporni ventil

NON-RETURN VALVE

Housing:	GG25, GSC-25; C22.8; 1.4581; 1.4404; 1.4408; 1.4552
Pressure (bar):	PN 10 - PN 40; ANSI 150; ANSI 300; ANSI 600; ANSI 1500
Dimensions:	DN 15 - DN 300; 1/2" - 12"
Standard:	DIN, ANSI
Design:	welded, threaded, flanged

NEPOVRATNI VENTIL

SAFETY VALVE

Housing:	GG25; GSC-25N; 1.4308; 1.4581
Pressure (bar):	PN 10/16; PN 25/40
Design:	welding, flanged
Temperature:	-10°C do +45°C

VARNOSTNI VENTIL

HIGH PRESSURE SAFETY VALVE TO 400 BAR

Safety valves are spring for steam, gases, aggressive media and liquids.

Housing:	1.4571
Pressure (bar):	PN40; PN160; PN250; PN320
Design:	welding, flanged, threaded

VISOKOTLAČNI VARNOSTNI VENTIL

BALL VALVE

Housing:	GG25; GSC-25; GS-24Mn5, stainless steel
Pressure (bar):	PN 16 - PN 63; ANSI 150 - ANSI 300
Design:	flanged, welded
Dimensions:	DN 15 - DN 1400
Drive:	manual, electric, pneumatic

KROGELNA PIPA

Housing:	carbon steel and stainless steel
Pressure (bar):	PN 10 - PN 40; ANSI 150 - ANSI 300
Design:	direct with short built-in length
Dimensions:	DN 15- DN 200
Drive:	manual, electric, pneumatic

KROGELNA PIPA

BALL VALVE for underground installation

Housing:	GS - C25
Pressure (bar):	PN 16 - PN 40
Design:	flanged, welded
Dimensions:	DN 25 - DN 200
Application:	for installation in underground pipelines for the installation in polyethylene pipes, a transition piece is made of steel-polyethylene

KROGELNA PIPA za podzemno vgradnjo

BALL VALVE with secondary sealing and drainage

Dimensions:

DDN 80 - DN 250

A secondary seal ball valve allows us to inject the grease between the surface of the sphere and the damaged seal in the event of leakage through a special system with non-return valves, and thus seal the tap again.

Ball valve with metal sealing is intended for installation in pipelines where abrasive media (dust, ash, cement, various granules, etc.) are transported

KROGELNA PIPA s sekundarnim tesnenjem in drenažnim izpustom

BALL VALVE - threaded, welded

Housing:	forged from brass: brass - nonnickel: stainless steel
Pressure (bar):	PN 40
Dimensions:	1/2" - 2 1/2"

STRAINERS

Housing:	GG25; GGG40; GS-C25, stainless steel
Pressure (bar):	PN 6 - PN 40
Design:	flanged, welded
Dimensions:	DN 15 - DN 800
Design:	flanged, threaded

GATE VALVE

Housing:	GG25, GSC-25, C22.8
Pressure (bar):	PN 16 - PN 400
Design:	flanged, welded
Dimensions:	DN 50 - DN 800
Standard:	DIN, ANSI
Drive:	electromotor

ZA SUN

Housing:	ASTM A487 Gr4 Class A
Pressure (bar):	2000, 3000, 5000 PSI
Design:	flanged, threaded
Dimensions:	2 1/16"; 2 9/16"
Temperature:	-29°C do 82°C

ZA SUN

KNIFE GATE VALVE

Housing:	GG25, stainless steel
Knife:	stainless steel
Sealing:	metal, NBR, EPDM
Pressure (bar):	6 - 10 bar
Dimensions:	DN 50 - DN 600
Drive:	manual, electric, pneumatic

NOŽNI ZASUN

SLUICE GATE

Shape:	square, round and rectangular
Dimension:	on request
Material:	carbon steel and stainless steel
Drive:	manual, electromotor, pneumatic, hydraulic
Application:	for controlling flows in channels of larger dimensions, for the control of lake water, for the control of waste water, in hydroelectric power plants for the protection of turbines, telescopic valves are used to control the level of liquids in reservoirs, etc.